Discharge Valve
Brass valve designed for discharging gas from medical gas stations. Compatible with O2 and N2O.
Ramp that gathers gas cylinders onto one line to feed the system with backup and uninterrupted supply. Galvanized steel, brass heads and copper pipe; models for 1 to 5 cylinders.
The cylinder ramp gathers several gas cylinders onto a single line so that gas is fed to the system with backup and without interruption. It helps route and reduce the high-pressure gas coming from the cylinders in a safe way.
It is built from galvanized steel, brass heads and copper pipe. Alternative models that connect 1, 2, 3, 4 or 5 cylinders make it suitable for different facility requirements.
| Material | Galvanized steel, brass heads, copper pipe |
|---|---|
| Single | Length: 180 mm; Model: 2200.10; Article Code: 90.1555 |
| Double | Length: 330 mm; Model: 2200.20; Article Code: 90.1556 |
| Triple | Length: 630 mm; Model: 2200.30; Article Code: 90.1557 |
| Quadruple | Length: 930 mm; Model: 2200.40; Article Code: 90.1558 |
| Quintuple | Length: 1230 mm; Model: 2200.50; Article Code: 90.1559 |
| Triple - Block | Length: 280 mm; Model: 1760.07; Article Code: 66.2011 |
For every device you purchase we set up an installation, training and after-sales support plan. Contact our teams for preventive maintenance contracts, spare parts and clinical application support.
Brass valve designed for discharging gas from medical gas stations. Compatible with O2 and N2O.
Chain that prevents gas cylinders from tipping over and keeps them stable and secure on the ramp. Alternative models for 1 to 5 cylinders.
Automatic changeover manifold feeding oxygen, nitrous oxide and other medical gases without interruption; it switches to the reserve cylinders when…
Panel that gives audible and visual warnings when a pressure problem occurs in central gas station manifolds; it monitors pressure via one positive…
Ball valve that controls medical gas flow and quickly shuts off the gas to a given area during emergencies and maintenance. Available with or without…
Zone control unit that manages medical gas lines section by section and provides precise pressure regulation at the point of use. Flush and surface…
140 cm tail pipes and 60 cm flexible hoses for connecting gas cylinders to a cylinder ramp. Available with different fittings for O2, CO2 and N2O.
Flexible connector used to link gas cylinders to a cylinder ramp. Supplied with dedicated fittings for O2, N2O, CO2 and other medical gas cylinders.
Digital alarm panels that continuously monitor medical gas source equipment, pipeline pressures and intensive care areas. Models are available from…
Dual-regulator manifold that switches automatically between two cylinder banks, keeping oxygen, nitrous oxide and carbon dioxide supply…