Discharge Valve
Brass valve designed for discharging gas from medical gas stations. Compatible with O2 and N2O.
Dual-regulator manifold that switches automatically between two cylinder banks, keeping oxygen, nitrous oxide and carbon dioxide supply uninterrupted. 40 and 150 m³/h capacities, 4-7 bar outlet.
The 4000.10 and 4000.15 dual-regulator manifolds work on the automatic changeover principle and ensure that oxygen, nitrous oxide or carbon dioxide reaches the healthcare facility continuously. A cylinder bank sits on each side of the pressure control assembly.
The system is designed around a continuous transfer function, so gas supply carries on even while cylinders are being replaced. This delivers a continuous and accurate supply of gas to the facility. A fully removable cover provides easy access to the internal components.
These pressurized gases are needed in many areas, from operating rooms to intensive care and neonatal care units, and from emergency departments to patient rooms.
| Manifold Type | 2 stages, 2 regulators |
|---|---|
| Capacity | 40 m³/h (Model 4000.15 / 4000.15A); 150 m³/h (Model 4000.10 / 4000.10A) |
| Inlet Size | 1/2 inch |
| Outlet Size | 22 mm |
| Outlet Pressure | 4-7 bar |
| 150 m³/h, Without Alarm | 4000.10 (article code 66.1085) |
| 150 m³/h, With Alarm | 4000.10A (article code 66.1087) |
| 40 m³/h, Without Alarm | 4000.15 (article code 66.1086) |
| 40 m³/h, With Alarm | 4000.15A (article code 66.1088) |
For every device you purchase we set up an installation, training and after-sales support plan. Contact our teams for preventive maintenance contracts, spare parts and clinical application support.
Brass valve designed for discharging gas from medical gas stations. Compatible with O2 and N2O.
Chain that prevents gas cylinders from tipping over and keeps them stable and secure on the ramp. Alternative models for 1 to 5 cylinders.
Ramp that gathers gas cylinders onto one line to feed the system with backup and uninterrupted supply. Galvanized steel, brass heads and copper pipe…
Automatic changeover manifold feeding oxygen, nitrous oxide and other medical gases without interruption; it switches to the reserve cylinders when…
Panel that gives audible and visual warnings when a pressure problem occurs in central gas station manifolds; it monitors pressure via one positive…
Ball valve that controls medical gas flow and quickly shuts off the gas to a given area during emergencies and maintenance. Available with or without…
Zone control unit that manages medical gas lines section by section and provides precise pressure regulation at the point of use. Flush and surface…
140 cm tail pipes and 60 cm flexible hoses for connecting gas cylinders to a cylinder ramp. Available with different fittings for O2, CO2 and N2O.
Flexible connector used to link gas cylinders to a cylinder ramp. Supplied with dedicated fittings for O2, N2O, CO2 and other medical gas cylinders.
Digital alarm panels that continuously monitor medical gas source equipment, pipeline pressures and intensive care areas. Models are available from…